Miles By Motorcycle
established 11 years ago
Suzuki DR650SE Tech ThreadSubscribe to this blog RSS Feed
    You must be logged in and belong to this group to post to this forum.
    26 of 81
    Yermo
    10 years ago
    Excellent!
    27 of 81
    Yermo
    10 years ago
    The screws on my 2009 DR650SE Neutral Sender Unit were just past finger tight. It would not have been long before they worked themselves completely loose.

    Bullet dodged. Photos and more info soon. 
    28 of 81
    buffalo
    10 years ago
    Good thing you checked--better than finding the switch dangling as I did...
    29 of 81
    buffalo
    9 years ago
    As a (probably long overdue) follow up, the bike has worked and run well since we did the neutral switch repair.

    I've got somewhere north of 500 miles on it so far, and am looking forward to better weather so I can pile up some more
    30 of 81
    Yermo
    8 years ago
    Exploring tire choices for the my DR650SE. It's time to replace the Death Wings with something a bit better. Considering Heidenau's:
    Link #10548
    buffalo
    10 years ago

    Heidenau K60 Scout Front Tire - RevZilla

    Purchase the Heidenau K60 Scout Front Tire at RevZilla Motorsports. Get the best free shipping & exchange deal anywhere, no restock fees and the lowest prices -- guaranteed.

    http://www.revzilla.com/motorcycle/...


    31 of 81
    Yermo
    8 years ago
    Realistically I do about 90% of my riding on pavement searching for fire trails and gravel roads so the K76 may be a better option than the K60:
    Link #11556
    Yermo
    8 years ago

    Heidenau K76 Front Tire - RevZilla

    Purchase the Heidenau K76 Front Tire at RevZilla Motorsports. Get the best free shipping & exchange deal anywhere, no restock fees and the lowest prices -- guaranteed.

    http://www.revzilla.com/motorcycle/...


    32 of 81
    Yermo
    8 years ago
    buffalo, what tires are you running on your dr650?
    33 of 81
    Yermo
    8 years ago
    Huh. Revzilla is out of the Heidenau K60's and interestingly Heidenau doesn't seem to make a correctly sized rear for the DR650SE, which is 120/90-17. Procycle lists a 130/80-17 as an option but I need to verify that that tire will work. I'm not a fan of mounting incorrectly sized tires.

    So now I'm looking at the tires buffalo has on his DR which are the Mefo explorers:

    Link #11561
    Yermo
    8 years ago

    Mefo Explorer Dual Sport Tires - RevZilla

    Purchase the Mefo Explorer Dual Sport Tires at RevZilla Motorsports. Get the best free shipping & exchange deal anywhere, no restock fees and the lowest prices -- guaranteed.

    http://www.revzilla.com/motorcycle/...
    34 of 81
    Yermo
    8 years ago
    This is interesting, Twisted Throttle sells accessories for the DR650SE:

    Link #11563
    Yermo
    8 years ago

    DR650SE '96-'16 - Suzuki - Shop by Bike | TwistedThrottle.com

    Twisted Throttle LLC. - Sport and Adventure Touring Equipment - North American importer and distributor for SW-Motech, MRA Windscreens, Bags-Connection Electric Tankbags, Barkbusters Hand Guards, Kaoko Throttle Locks, Denali LED headlights, Techmounts, dealer for GIVI USA, Gerbing Heated Clothing, and more! We offer the best selection of motorcycle hard luggage, windscreens, centerstands, and crashbars for metric bikes on the Internet!

    http://www.twistedthrottle.com/shop...
    35 of 81
    buffalo
    8 years ago
    I've had pretty good luck with the explorers so far. We'll see how they last...
    36 of 81
    Yermo
    8 years ago
    EDIT: These are NOT the correct weights to use.

    So buffalo and I realized yesterday when trying to mount the MEFO Explorers on my DR650SE that we didn't have the right kind of wheel balance weights. 

    The stick on kind won't work on the thin spoked rims. Instead they require a kind of weight that crimps onto the spokes themselves. 

    I'm going to give these over at Revzilla a try:

    Link #11604
    Yermo
    8 years ago

    Barnett Wheel Balancing Weights - RevZilla

    Purchase the Barnett Wheel Balancing Weights at RevZilla Motorsports. Get the best free shipping & exchange deal anywhere, no restock fees and the lowest prices -- guaranteed.

    http://www.revzilla.com/product/bar...
    37 of 81
    Yermo
    8 years ago
    So I found out the hard way that the Barnett weights don't seem to be the right ones.

    I have however found these:

    Link #11608
    Yermo
    8 years ago
    38 of 81
    buffalo
    8 years ago
    This looks like an interesting potential solution as well:

    Link #11638
    buffalo
    8 years ago

    Re-Usable Wheel Spoke Weights, 8 pack :: Aerostich Motorcycle Jackets, Suits, Clothing, & Gear

    <p class="indent">A simple, re-usable wheel balancing solution. Slide the CNC machined solid brass or nickel weights over the spoke and tighten a single allen set screw to the spoke nipple. Adjust the amount of weight and placement as necessary to achieve

    http://www.aerostich.com/re-usable-...
    40 of 81
    Yermo
    8 years ago
    Some photos about various technical aspects of the DR650SE. This particular link shows some RaceTech Gold Value installation points:

    41 of 81
    Yermo
    8 years ago
    Some RaceTech installation notes:

    42 of 81
    Yermo
    8 years ago
    A wiki about the DR650:

    Link #11696
    Yermo
    8 years ago

    Suzuki DR650 Wiki - Wikia

    Suzuki DR650 Wiki is a community site that anyone can contribute to. Discover, share and add your knowledge!

    http://dr650.wikia.com/wiki/Main_Pa...
    43 of 81
    Yermo
    8 years ago
    And on the subject of improving a damper rod holding tool:

    Link #11698
    Yermo
    8 years ago

    How to make a damper rod fork tool - Suzuki DR650 Wiki - Wikia

    You can make your own damper rod tool from a 3/4" x 1-1/2" - 10 tpi bolt from your friendly...

    http://dr650.wikia.com/wiki/How_to_...
    44 of 81
    Yermo
    8 years ago
    Another take on a damper rod holding tool using some 1" square metal stock:

    Link #11700
    Yermo
    8 years ago
    45 of 81
    Yermo
    8 years ago
    More on Gold Valve installation:

    Link #11702
    Yermo
    8 years ago

    Emulator Fitting

    Racetech Gold Valve emulator fitting

    http://www.racetech.com/page/title/...
    49 of 81
    Yermo
    8 years ago
    Blog article will be forthcoming once I have a chance to write, which should be in the next couple days.

    Long story short, I destroyed my clutch up on the mountain pass outside of Ephraim, Utah in a kind of sticky cement like mud. I was making good progress until the mud caked up on the rear wheel so much it locked the wheel at which point the clutch broke free and broke.

    I have heard of front wheels locking up, but I have never heard of this happening to a drive wheel.

    bruce came out and got me. (18 hours round trip. Thank you!!) I'm going to open the bike up, inspect the damage, and start replacing parts.

    I have to confirm it, but rumor has it the clutch is a weak point when it comes to deep mud. 

    50 of 81
    Yermo
    8 years ago
    A discussion on ADVRider on clutch failures. There doesn't seem to be much consensus on which clutch to get.

    Link #13325
    Yermo
    8 years ago

    DR650: Burned out clutch | Adventure Rider

    So I burned my clutch out today. Any suggestions on aftermarket kits?

    http://advrider.com/index.php?threa...